Produktbild Cover - ALFRA Split hole puncher TriCut+®

Produktbild - ALFRA Split hole puncher TriCut+® 0

Produktbild - ALFRA Split hole puncher TriCut+® 1

ALFRA Split hole puncher TriCut+®

The big plus of this holepuncher made by Alfra is the outstanding performance on stainless steel – for example for puch-outs in control cabinets or for production facitilies in the food industry.

The waste piece is decaying into three pieces. That’s why it doesn’t tilt in the die. The Tricut+ is punching holes into stainless steel from a material thickness up to 2,5 mm (19,0 mm ; ¾“ screw or draw bolt)or on stainless steel from a thickness up to 2,0 mm (11,1 mm screw or draw bolt).

Request a quote

Open Instruction

Click here for the catalogue

Ø in mm	Max. Material thickness in mm (S235)	Size Metric	Size PG	Size Inch		Size Conduit & Pipe Size	Punches and dies with ball bearing draw bolt	Punches and dies
15,2	2,0	-	9	-	0.598	-	01465	01600
16,2	2,0	M 16	-	-	0.638	-	01466	01656
18,6	2,0	-	11	-	0.732	-	01467	01603
20,4	2,0	M 20	13	-	0.803	-	01468	01606
22,5	2,0	-	16	7/8"	0.886	1/2"	01469	01609
25,4	2,5	M 25	-	1"	1.000	-	01470	01659
28,3	2,5	-	21	-	1.114	3/4"	01471	01612
30,5	2,5	-	-	1-7/32"	1.201	-	01472	01615
32,5	2,5	M 32	-	-	1.280	-	01473	01662
34,6	2,5	-	-	1-11/32"	1.362	1"	01474	01618
37,0	2,5	-	29	-	1.457	-	01475	01621
40,5	2,5	M 40	-	-	1.594	-	01476	01665
43,2	2,5	-	-	1-11/16"	1.701	1 1/4"	01477	01624
47,0	2,5	-	36	-	1.850	-	01478	01627
49,6	2,5	-	-	1-15/16"	1.953	1 1/2"	01479	01630
50,5	2,5	M 50	-	-	1.988	-	01480	01668
54,0	2,5	-	42	2-1/8"	2.126	-	01481	01633
60,0	2,5	-	48	-	2.362	-	01482	01636
61,5	2,5	-	-	2-3/8"	2.421	2"	01483	01640
63,5	2,5	M 63	-	2-1/2"	2.500	-	01484	01671

Presse

ALFRA Press

ALFRA FormCut

Presse

Presse

ALFRA Split hole puncher TriCut+®

You may also be interested in